These are modeled LED Bar brackets for retrofitting your own switchback or stagnant LED strips to the MR2 Spyder pre-facelift headlight housing. These are raw files that have looser tolerances to allow sanding and heat flexing. These are by no means a final product and will require fitment. Pathway for led strip is about 12 inches long and roughly 8mm-10mm in LED strip width. Files were also modeled in inches and not metric; so when importing verify your increments are correct. Hole(s) will need to be drilled for your LED wiring in your headlight housing.
Recommended print material is PolyMaker ASA.
09/08/2025
UPDATE: new files now added.
-LED bar without segment split (continuous)
-LED bar internal fill for printed diffuser. (recommend transparent ASA, but test at your will)
Terms of Use:
This file shall not be resold, modified, or redistributed.
Buyer shall not sell actual 3D prints generated from these files. For personal use only.
For off-road use only.
3D model of headlight housing is not included.
Feel free to find me on Instagram @mr2_krakan
If you run into any troubles please email me at ramonlnatal@gmail.com, or DM me on Intagram.
Let me know if you have any questions.
These are modeled LED Bar brackets for retrofitting your own switchback or stagnant LED strips to the MR2 Spyder pre-facelift headlight housing. These are raw files that have looser tolerances to allow sanding and heat flexing. These are by no means a final product and will require fitment. Pathway for led strip is about 12 inches long and roughly 8mm-10mm in LED strip width. Files were also modeled in inches and not metric; so when importing verify your increments are correct. Hole(s) will need to be drilled for your LED wiring in your headlight housing.
Recommended print material is PolyMaker ASA.
09/08/2025
UPDATE: new files now added.
-LED bar without segment split (continuous)
-LED bar internal fill for printed diffuser. (recommend transparent ASA, but test at your will)
Terms of Use:
This file shall not be resold, modified, or redistributed.
Buyer shall not sell actual 3D prints generated from these files. For personal use only.
For off-road use only.
3D model of headlight housing is not included.
Feel free to find me on Instagram @mr2_krakan
If you run into any troubles please email me at ramonlnatal@gmail.com, or DM me on Intagram.
Let me know if you have any questions.